Truck-mounted crane Klaas K850

👉 Max. lifting capacity: up to 5,000 kg 👉 Range: up to 31 m 👉 Height: up to 36.9 m

Vrachtwagen kraan Klaas K850
Home » Buy a truck-mounted crane » Truck-mounted crane Klaas K850
Vrachtwagen kraan Klaas K850
Vrachtwagen kraan Klaas K850
Vrachtwagen kraan Klaas K850
Vrachtwagen kraan Klaas K850
Vrachtwagen kraan Klaas K850
Vrachtwagen kraan Klaas K850
Vrachtwagen kraan Klaas K850
Vrachtwagen kraan Klaas K850

Technical specifications

  • Lifting capacity (std./opt.): 3,0 / 5,0 T

  • Hook height: 36,90m

  • Outrigger width (min/max): 2,95 / 5,49 m

  • Drum capacity: 3,0 T

  • Drum speed: 66 m/min

FOLDING ARM LENGTH:

  • Articulated arm 3T: 5.00 m

  • Articulated arm + extension 1 (2 T): 8.60 m

  • Articulated arm + extension 2 (1 T): 12.20 m

logo Klaas
Vrachtwagen kraan Klaas K850 lastendiagram

  • Load   Reach    Height

  • 3.000 kg – 7,50 m – 24,00 m

  • 2.000 kg – 13,00 m – 21,00 m

  • 1.000 kg – 23,00 m – 17,00 m

  • 500 kg – 30,00 m – 8,00 m

  • In 5T mode:

  • 5.000 kg – 6,00 m – 10,50 m

  • 3.500 kg – 9,00 m – 5,00 m

With a maximum hook height of nearly 37 m and an extension length of 37.6 m, the K850 meets virtually all the requirements roofers and carpenters have for a powerful crane. An exceptional reach of 31 m with a 500 kg load simplifies daily tasks in timber frame construction, industrial hall building, and flat roofing work. Powered by a separate, fuel-efficient diesel engine, the K850 consumes very little fuel—benefiting both the wallet and the environment.

Equipment

  • extremely strong and weather-resistant special aluminium alloy with low dead weight
  • no loss of strength at the weld thanks to friction stir welding; the joints are as strong as the solid material
  • the characteristic Klaas hole pattern reduces the wind-exposed surface area, keeps the dead weight low, and ensures high flexural rigidity

  • Fully hydraulic shoring combined with ASC shoring control enables continuously variable shoring widths, including in the direction of the overhang
  • No predefined notches that restrict the operator
  • L-shaped outriggers ensure maximum stability against tipping
  • Formwork-free operation possible thanks to long vertical cylinders

  • Quick and easy setup of the crane via radio remote control
  • Continuous lateral extension of each outrigger
  • Automatic leveling of the outrigger cylinders for optimal setup, even on uneven surfaces
  • Continuous pressure monitoring that responds to changing external conditions

  • The hinge plate is machined from solid stock, enabling it to withstand higher loads.
  • Electronic monitoring within the hinge ensures optimal load absorption at any angular position.
  • A dual-acting cylinder provides enhanced safety and protection against lateral forces.

  • Torsion-free boom lifting thanks to dual tilt cylinders
  • Dual safety provided by two cylinders
  • Improved absorption of lateral steering forces, resulting in a stable and quiet boom position

  • Rapid telescoping under load thanks to patented Klaas cable technology
  • Integrated electronic length measurement records the mast’s current operating length and calculates the maximum possible load
  • Low cable weight increases reach and load capacity
  • Easily accessible, low-maintenance cable system

  • high-quality, German-made slewing ring
  • thanks to a well-engineered slewing bearing, the turret can rotate endlessly in both directions

  • protected routing of all movable electrical and hydraulic lines within or on the mast
  • no hose or cable reels on the mast
  • use of low-maintenance galvanized steel hydraulic lines in the substructure, avoiding costly replacement of hydraulic hoses

  • Complex control system compliant with EN 280 and EN 13000
  • State-of-the-art safety PLC for crane operation
  • CAN-bus control unit for highly responsive and precise operation
  • Soft start/stop for low-vibration operation
  • Expandable with an additional remote control

  • large display provides a clear view of all key crane operating states
  • precise start-up thanks to sensitive joysticks
  • powered by standard batteries or cable
  • can be equipped with a memory functionthis learns two reference points (e.g., material location on the ground and unloading location on the roof), between which the crane moves safely in hold-to-run mode

  • separate, powerful diesel engine for crane operation
  • low fuel consumption – resulting in significant cost savings and reduced environmental impact
  • no load on the truck engine during crane operation
  • electronic fuel level monitoring on the crane with remote control display

  • spacious, lockable storage compartments
  • secure storage for tools and accessories
  • large storage area on the crane
  • clean, high-quality overall appearance thanks to aluminum tread plate cladding

FOR ALL INFORMATION ABOUT THIS PRODUCT:

Jean-Marc MAMPAEY  – vente@eurotopconcept.be – +32 (0)475 86 71 76