👉 Klaas K350 Electric Trailer Crane

👉 Maximum lifting capacity: up to 1,500 kg  👉 Reach: up to 22 m  👉 Height: up to 31 m

Klaas k280 aanhangerskraan
Klaas k350 e
Klaas k350 e
Klaas k350 e
Klaas k350 e

Technical specifications

  • Lifting capacity (std./opt.): 1.500 / – kg

  • Hook height: 31 m

  • Total mast length: 32.80 m

  • Outrigger width  (min.): 3,60 m

  • Outrigger spread (max.): 5.04 m

  • Winch lifting capacity: 1,500 kg

  • Articulating arm (1,500 kg – 800 kg): 4.29 – 8.50 m

  • Boom 1 (500 kg): 10.70 m

  • Vehicle dimensions: 9.43 x 2.28 x 2.58 m

  • Total weight: 3.5 tonnes

klaas logo

  • Load   Reach    Height

  • 1.600 kg – 4,50 m – 23,00 m

  • 1.000 kg – 8,50 m – 21,00 m

  • 500 kg – 16,00 m – 14,00 m

  • 350 kg – 17,00 m – 25,00 m

  • 250 kg – 22,00 m – 20,00 m

The Klaas K350 E is the latest Klaas trailer crane in the 3.5-tonne class, featuring state-of-the-art equipment, excellent towing comfort and outstanding performance. Its maximum lifting capacity is 1,500 kg, while its lateral reach with a 250 kg load is an impressive 22 m. What really sets this crane apart, however, is its battery-powered electric motor, allowing it to operate completely independently, sustainably and quietly.

The lithium battery can be charged from a standard 230 V power socket and can even be charged while the crane is in operation. A fully charged battery provides approximately 10 hours of operation. Thanks to the energy-efficient START-STOP function, the crane automatically switches off when it is not in use. This allows the Klaas K350 E to operate for more than a full working day without the need for recharging.

Equipment

  • extremely strong and weather-resistant special aluminium alloy with low dead weight
  • no loss of strength in the weld due to friction stir welding; the joints are as strong as the solid material
  • the characteristic Klaas perforation pattern reduces the wind-exposed surface area, lowers the dead weight, and ensures high resistance to deformation

  • The hydraulic hinge with a folding tip ensures quick and easy installation.
  • Higher load-bearing capacity on the integrated extensions thanks to the strong folding-point connection.
  • Dual folding cylinder for enhanced safety and protection against lateral forces.

  • Torsion-free boom lifting thanks to dual tilt cylinders
  • Dual safety provided by two cylinders
  • Improved absorption of lateral steering forces, resulting in a stable and quiet boom position

  • Fully hydraulic shoring combined with the ASC shoring control system enables variable shoring widths, including towards the overhang
  • L-shaped support legs ensure maximum stability against tipping
  • Formwork-free construction is possible thanks to long vertical cylinders

  • rapid telescoping under load thanks to patented Klaas cable technology
  • integrated electronic length measurement records the mast’s current extension length and calculates the maximum possible load
  • low dead weight of the cables increases reach and load capacity
  • easily accessible and low-maintenance cable system

  • Jib equipped with patented Klaas telescopic technology
  • Hydraulic telescoping of the first folding jib section via radio remote control
  • Folding jib can be used even in confined installation situations thanks to “extension in mid-air”
  • Hydraulic telescoping function also available during floor-level operation

  • protected routing of all moving electrical and hydraulic cables within or on the mast
  • no hose or cable reels on the mast
  • use of low-maintenance galvanized steel hydraulic lines in the undercarriage, preventing costly hydraulic hose replacement

  • Complex control system compliant with EN 280 and EN 13000
  • State-of-the-art safety PLC for crane operation
  • CAN-bus control unit for highly responsive and precise operation
  • Soft start/stop for low-vibration operation
  • Expandable with an additional remote control

  • Large display for a clear view of all key crane operating states
  • Precise start-up thanks to sensitive joysticks
  • Power supply via standard batteries or cable

  • Powered by a lithium battery
  • Rechargeable via a standard 230V wall outlet
  • Can be charged while in use

  • high-quality, German-made slewing ring
  • a well-engineered slewing bearing enables endless rotation of the superstructure in both directions

  • Self-propelled hydraulic drive, controlled via remote control as standard
  • Easy maneuvering in the tightest spaces

FOR ALL INFORMATION ABOUT THIS PRODUCT:

Jean-Marc MAMPAEY  – vente@eurotopconcept.be – +32 (0)475 86 71 76