Klaas K280 Electric Trailer Crane

👉 Load: up to 800 kg 👉 Range: up to 18.5 m 👉 Height: up to 19 m

QUOTE

Home » Trailer cranes » Klaas K280 Electric Trailer Crane

Technical specifications

Battery-powered crane with an operating time of over 8 hours.
Lifting capacity (std./opt.): 800 / – kg
Hook height: 25,5 m
Total weight: 2.8 to 3 tonnes
Total mast length: 27.00 m

Support width (min.): 2.90 m
Support width (max.): 4.93 m
Winch pulling capacity: 800 kg
Boom (800 kg): 4.50 m
Vehicle dimensions: 9.21 x 2.12 x 2.50 m
Trailer weight: 3.49 t

Load Reach Height
800 kg – 6,50 m – 19,00 m
500 kg – 11,50 m – 15,00 m
350 kg – 15,00 m – 19,00 m
300 kg – 16,50 m – 17,50 m
250 kg – 18,50 m – 14,50 m

The Klaas K280 is a reliable all-rounder for roofers and carpenters who mainly work in residential construction. It offers a hook height of 25.5 m and an impressive reach of 18.5 m with a 250 kg load. With a knuckle point height of approximately 22 m, the K280 can also reach the rear of multi-storey residential buildings without having to reposition the crane.

A hydraulic knuckle joint, operated by remote control, ensures quick and convenient setup. Thanks to its self-propelled drive and compact footprint, this lightweight Klaas crane is ideal for construction sites with limited access.

The Klaas K280 can also be equipped with an electric motor and a powerful battery. This allows the K280E battery-powered crane to operate not only quietly and with reduced environmental impact, but also completely independently. The battery can be charged from a standard 230 V power socket. Thanks to its energy-efficient settings and automatic stop-and-go function, the crane can operate for several days on a single battery charge.

SEE THE VIDEO

DOWNLOAD BROCHURE

Equipment

Boom systeem

extremely strong and weather-resistant special aluminum alloy with low dead weight
no loss of strength in the weld due to friction stir welding; the joints are as strong as the solid material
the characteristic Klaas perforation pattern reduces the wind-exposed surface area, while ensuring low dead weight and high resistance to deformation

Flying arm connection

The hydraulic hinge with a folding tip ensures quick and easy installation.
Higher load-bearing capacity on the integrated extensions thanks to the strong folding-point connection.
Dual folding cylinder for enhanced safety and protection against lateral forces.

Double movable cylinders

Torsion-free boom lifting thanks to dual tilt cylinders
Dual safety provided by two cylinders
Improved absorption of lateral steering forces, resulting in a stable and quiet boom position

H-Outriggers

Fully hydraulic shoring combined with the ASC shoring control system enables variable shoring widths, including towards the overhang
L-shaped support legs ensure maximum stability against tipping
Formwork-free construction is possible thanks to long vertical cylinders

Telescopic winch

rapid telescoping under load thanks to patented Klaas cable technology
integrated electronic length measurement records the mast’s current extension length and calculates the maximum possible load
low dead weight of the cables increases reach and load capacity
easily accessible and low-maintenance cable system

Energy supply

protected routing of all moving electrical and hydraulic cables within or on the mast
no hose or cable reels on the mast
use of low-maintenance galvanized steel hydraulic lines in the undercarriage, preventing costly hydraulic hose replacement