Truck-mounted crane Klaas K700 (E)

👉 Electric or diesel

👉 Maximum lifting capacity: up to 1,600 kg  👉 Reach: up to 30 m  👉 Hook height: up to 34.5 m

Vrachtwagen kraan Klaas K700 RSX
Home » Buy a truck-mounted crane » Truck-mounted crane Klaas K700 E
Vrachtwagen kraan Klaas K700 RSX
Vrachtwagen kraan Klaas K700 RSX
Vrachtwagen kraan Klaas K700 RSX
Vrachtwagen kraan Klaas K700 RSX
Vrachtwagen kraan Klaas K700 RSX
Vrachtwagen kraan Klaas K700 RSX
Vrachtwagen kraan Klaas K700 RSX
Vrachtwagen kraan Klaas K700 RSX
Vrachtwagen kraan Klaas K700 RSX
Vrachtwagen kraan Klaas K700 RSX
Vrachtwagen kraan Klaas K700 RSX
Vrachtwagen kraan Klaas K700 RSX
Vrachtwagen kraan Klaas K700 RSX
Vrachtwagen kraan Klaas K700 RSX

Technical specifications

  • Lifting capacity (std./opt.): 1.600 / – kg

  • Max Hook height: 34,50m

  • Totale mastlengte: 36,50 m

  • Outrigger width (min/max): 3,03 / 5,29 m

  • Drum capaity: 1.600 kg

  • Articulating arm (1,600 kg – 350 kg): 5.00 – 11.65 m

  • Boom 1 (250 kg): 13.90 m

  • Vehicle dimensions: Depending on the truck

  • Total weight: > 7.5t

klaas logo
Vrachtwagen kraan Klaas K700 RSX lastendiagram

  • Load   Reach    Height

  • 1.600 kg – 5,50 m – 23,50 m

  • 1.000 kg – 14,00 m – 18,00 m

  • 500 kg – 19,50 m – 7,00 m

  • 250 kg – 30,00 m – 10,00 m

The K700, with a hook height of 34.5 m and a maximum lifting capacity of 1.6 tonnes, is equipped with a wide range of technical features that make the daily work of roofers, carpenters and façade contractors considerably easier. Its compact dimensions and impressive lateral reach are particularly noteworthy. The K700 can handle loads of 250 kg at a reach of up to 30 m. Equipped with a double hydraulically telescoping knuckle boom, it is the ideal crane for use in urban areas.

The crane is also available as the K700 E, powered by a battery-driven electric motor. A large lithium battery combined with optimised energy management allows the crane to operate independently for a full working day. Even in aerial work platform mode, it can operate for extended periods without recharging. The K700 E can be charged via a standard 230 V power socket.

Equipment

  • extremely strong and weather-resistant, lightweight special aluminum alloy
  • no loss of strength in the weld due to friction stir welding; the joints are as strong as the solid material
  • the characteristic Klaas cutouts reduce the wind-exposed surface area and the weight, while maintaining high flexural rigidity

  • Fully hydraulic extension of the outriggers, combined with the ASC stabilization system, allows for infinite extension widths, including in the lateral direction
  • no predefined locking positions to restrict the operator
  • L-shaped outriggers ensure maximum stability against tipping
  • stabilization is achieved via long vertical cylinders

  • Quick and simple crane setup entirely via radio remote control
  • Continuous lateral extension of each outrigger leg
  • Automatic leveling of the outrigger cylinders for optimal setup, even on uneven surfaces
  • Continuous pressure monitoring that responds to changing external conditions

  • Hydraulic telescoping of the first and second boom sections via radio remote control
  • Simultaneous operation of both extensions ensures optimal load distribution
  • Use of the folding jib tip even in confined installation spaces, thanks to an “air outlet” feature
  • Hydraulic telescoping, including in the stepped position

  • the hinge plate is machined from solid material, thereby enabling higher load-bearing capacities
  • electronic control within the hinge ensures optimal load-bearing capacity at any opening angle
  • double cylinder with a folding tip for enhanced safety and protection against lateral forces

  • Torsion-free boom lifting thanks to two tilt cylinders
  • Dual safety thanks to two cylinders
  • Improved absorption of lateral forces, resulting in greater boom stability

  • Rapid telescoping under load thanks to patented Klaas cable technology
  • Integrated electronic length measurement records mast extension and calculates the maximum permissible load
  • Low cable weight increases reach and load capacity
  • Easily accessible, low-maintenance cable technology

  • protected routing of all electrical and hydraulic lines within the mast
  • no hose or cable reels on the mast
  • use of low-maintenance galvanized steel hydraulic lines, avoiding costly replacement of hydraulic hoses

  • A large display clearly shows all essential operating states of the crane.
  • Precise start-up via proportional joysticks.
  • Powered by AA batteries or cable.
  • Can be equipped with a memory function (optional). This learns two reference points (e.g., material location on the ground and unloading location on the roof), between which the crane moves safely in hold-to-run mode.

  • Complex control system compliant with EN 280 and EN 13000
  • State-of-the-art safety PLC for crane operation
  • CAN-bus control unit for highly sensitive and precise operation
  • Soft start/stop for greater operational precision
  • Expandable with an additional remote control

  • full-body fairing
  • spacious, lockable storage compartments
  • secure storage for tools and accessories
  • large storage area on the crane
  • clean, high-quality overall appearance thanks to ribbed aluminum plating

  • high-quality, German-made slewing ring
  • sophisticated rotary bearing assembly enables continuous rotation of the turret in both directions

  • Personal safety in accordance with BG guidelines
  • for work at heights where stationary safety measures—such as scaffolding or safety rings—are not feasible
  • Personal safety provided by the crane arm enables unrestricted work in difficult and hazardous areas

FOR ALL INFORMATION ABOUT THIS PRODUCT:

Jean-Marc MAMPAEY  – vente@eurotopconcept.be – +32 (0)475 86 71 76