👉 Trailer crane Klaas K300 Elektric

👉 Maximum lifting capacity: up to 1,500 kg  👉 Reach: up to 21 m  👉 Height: up to 30 m

Klaas k280 aanhangerskraan

Technical specifications

  • Lifting capacity (std./opt.): 1.500 / – kg

  • Hook height: 30 m

  • Total weight: 3.5 tonnes

  • Total mast length: 30.70 m

  • Outrigger width (min.): 2,85 m

  • Outrigger spread (max.): 5.04 m

  • Winch lifting capacity: 1,500 kg

  • Boom 1 (1,500 kg): 5.46 m

  • Boom 2 (800 kg): 9.12 m

  • Vehicle dimensions: 9.22 x 2.29 x 2.50 m

  • Total weight: 3.5 tonnes

klaas logo

  • Load   Reach    Height

  • 1.500 kg – 4,50 m – 22,00 m

  • 1.000 kg – 8,00 m – 20,80 m

  • 800 kg – 9,50 m – 24,50 m

  • 500 kg – 14,00 m – 24,00 m

  • 250 kg – 21,00 m – 17,50 m

This latest Klaas model, based on the proven K21-30, was developed as an electric crane. The trailer crane, which has a towing weight of 3.5 tonnes, offers a hook height of approximately 30 m. Thanks to its powerful folding boom joint, it can lift loads of up to 1,500 kg. Its lateral reach is equally impressive: 21 m with a 250 kg load or 14 m with a 500 kg load.

Thanks to its compact dimensions and convenient self-propelled drive, this versatile crane can also be positioned on narrow or difficult-to-access construction sites. A retractable drawbar reduces the crane’s required footprint to just 7 m in length.

The K300 E comes standard with an automatic levelling system, allowing the crane to be set up quickly and safely via remote control. Automatic height adjustment of the support cylinders ensures that the trailer remains stable even on uneven ground.

Overall, the K300 E is an ideal crane for professionals who mainly work on single-family homes and smaller multi-storey residential buildings and who value comfortable working conditions with minimal noise.

Equipment

  • rapid telescoping under load thanks to patented Klaas cable technology
  • integrated electronic length measurement records the mast’s current extension length and calculates the maximum possible load
  • low dead weight of the cables increases reach and load capacity
  • easily accessible and low-maintenance cable system

  • Torsion-free boom lifting thanks to dual tilt cylinders
  • Dual safety provided by two cylinders
  • Improved absorption of lateral steering forces, resulting in a stable and quiet boom position

  • The articulated arm hinge is machined from solid material, enabling a higher load-bearing capacity.
  • Electronic monitoring within the hinge ensures optimal load lifting at any angular position.
  • Dual movable cylinders provide enhanced safety and protection against lateral forces.

  • extremely strong and weather-resistant special aluminium alloy with low dead weight
  • no loss of strength in the weld due to friction stir welding; the joints are as strong as the solid material
  • the characteristic Klaas perforation pattern reduces the wind-exposed surface area, lowers the dead weight, and ensures high resistance to deformation

  • high-quality, German-made slewing ring
  • a well-engineered slewing bearing enables endless rotation of the superstructure in both directions

  • Complex control system compliant with EN 280 and EN 13000
  • State-of-the-art safety PLC for crane operation
  • CAN-bus control unit for highly responsive and precise operation
  • Soft start/stop for low-vibration operation
  • Expandable with an additional remote control

  • Fully hydraulic outrigger system combined with ASC control enables variable outrigger widths.
  • The ASC outrigger monitoring system continuously checks the crane’s stability, taking wind and ground conditions into account.
  • L-shaped outriggers ensure maximum stability against tipping.
  • Outrigger setup without additional support is possible thanks to long, vertical hydraulic legs.

allowing the total length to be reduced from 9.25 m to 7.00 m, so that the machine can also be set up where space is limited

  • protected routing of all moving electrical and hydraulic cables within or on the mast
  • no hose or cable reels on the mast
  • use of low-maintenance galvanized steel hydraulic lines in the undercarriage, preventing costly hydraulic hose replacement

  • Large display for a clear view of all key crane operating states
  • Precise start-up thanks to sensitive joysticks
  • Power supply via standard batteries or cable

  • Powerful 22 kWh lithium battery enables self-sufficient crane operation for a full workday
  • Energy storage unit charges via a 230-volt socket
  • Continuous charging is also possible during crane operation

  • Self-propelled hydraulic drive, controlled via remote control as standard
  • Easy maneuvering in the tightest spaces

  • the crane is completely set up quickly and easily using the radio remote control
  • each individual support infinitely extends laterally
  • automatic levelling of the support cylinders for optimal set-up even on uneven surfaces
  • constant pressure monitoring reacts to changing outside conditions

FOR ALL INFORMATION ABOUT THIS PRODUCT:

Jean-Marc MAMPAEY  – vente@eurotopconcept.be – +32 (0)475 86 71 76